The 6" Rotary Jet Hand Tool cleans a track of around 6". The rotary jets rotate at around 2000 rpm (At 1500 psi) with the water being scavenged back from the cleaning head through the vacuum ports around the periphery of the head. The tool can be used on surfaces of any orientation from virtical through to horizontal. The hand piece on the top of the tool can swivel through 360 degrees making it easy to get into tight spaces at any orientation. Simply release the trigger and rotate the head to the position desired. It will lock solidly in that position when the trigger is pulled again. In addition the rotary jets are offset to a thin walled side of the head so that the head can clean up to about 10mm from an obstruction such as a corner. Other rotary hand tools leave a margin of around 20mm.

The tool is extremely robust being constructed from glass fibre reinforced nylon and stainless steel. The high pressure rotary union uses silicon carbide seals and a large diameter stainless steel bearing. It can be operated at pressures between 600 and 3000 psi but cleaning is most effective at pressures over 1000 psi.

This tool can be used with our base Recycleaner base module or with any pressure/vacuum system such as a truck mounted system. The solution hose coupling is the standard for the industry and the vacuum hose is connected with a 38mm cuff.